Receiving a PCS Ready Link Call (1-to-1 Call)
1.
When you receive a PCS Ready Link call from a contact,
“
Call,” the contact’s name and the PCS Ready Link number
appear on the display.
2.
Press and hold
to get the floor.
You can get the floor before hearing a voice if nobody has
the floor.
3.
Speak after the beep (keep pressing down
while you are
speaking). After speaking, release the key to listen.
4.
To disconnect the call, press
.
Receiving a PCS Ready Link Call (Group Call)
1.
When you receive a PCS Ready Link call from one of the group
members, “Group Call,” the name, and the PCS Ready Link
number appear on the display.
2.
Press and hold
to get the floor (if nobody already has
the floor).
3.
Speak after the beep (keep pressing down
while you are
speaking). After speaking, release the key to listen.
4.
To disconnect the call, press
.
Redialing a PCS Ready Link Call
You can redial to the last PCS Ready Link call that you dialed or
received (whichever was more recent).
To redial a PCS Ready Link call:
1.
From the PCS Ready Link List, highlight
Redial
, then press and
hold
to redial the last PCS Ready Link call and get the floor.
2.
Speak after the beep (keep pressing down
while you are
speaking). After speaking, release the key to listen.
3.
When you are finished, press
.
Note:
You can change the volume and the speaker setting while a PCS Ready
Link call is activated.
Volume:
Adjust the voice volume by using the Side Volume
keys or /
on the Navigation key except when you are pressing and holding
. This doesn’t affect tone and beep volume.
Speaker:
Switch the speaker
On or Off by pressing
.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics
29
Содержание SCP-7200
