Sanyo SCP-3100, Руководство по эксплуатации, Страница: 16 / 72

Saving a Phone Number
Your PCS Phone can store a total of 500 phone numbers in 300 Contacts entries. Each entry
can store 7 phone numbers, and the entry’s name can contain 16 characters. Your phone
automatically sorts the Contacts entries alphabetically.
To save a number from the main menu:
1. Enter a phone number.
2. Press
Options (right softkey).
3. Select Save Phone# and press MENU/OK.
4. Select a label by Selecting Mobile, Home, Work, Pager, Fax, Other or No Label and press
MENU/OK.
5. Enter a name and press MENU/OK.
If you have already stored entries in the Contacts list, you are prompted to select the
following entry modes:
New Name to enter a name directly.
From Ph. Book to select a name from Contacts entry list.
6. Press Save (left softkey).
After you have saved the number, the new Contacts entry is displayed. (See “Contacts List
Entry Options” on page 42).
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a specific string of numbers.
To find a phone number:
1. Enter the last four or more digits of the number and press Options (right softkey). The
more numbers you enter, the more specific the search becomes.
2. Select Find and press MENU/OK.
3. The Contacts entry that ends with the digits you entered appears.
4. Select your desired entry.
Press MENU/OK to display the entry details.
Press TALK or SPEAKER to dial.
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated systems, such as
voicemail or credit card billing numbers. If you select a hard pause, the next set of numbers are
sent when you press TALK. If you select a 2-second pause, your phone automatically sends the
next set of numbers after two seconds.
Note: You can have multiple pauses in a phone number and combine 2-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter the phone number and press Options (right softkey).
2. Select
either Hard Pause or 2-Sec. Pause and press MENU/OK. Hard Pauses are
displayed as an “H” and 2-second pauses as a “T”.
3. Enter additional numbers.
15