Sanyo PLV-55WM1, Руководство пользователя

Страница: 36 / 60

36
Computer Input
The Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. This function can be operated as follows.
Select the PC adjust Menu with the Point Up / Down button,
and then press the Point Right button to enter the sub-menu. 1
2 Choose the Auto PC adj. item and then press the SELECT
button.
PC Adjust Menu
Auto PC Adj.
To store adjustment data
Adjustment parameters from Auto PC adjustment can be memorized
in this LCD Projection Monitor. Once parameters are memorized, the
setting can be done just by selecting Mode in the Computer System
Selection. (p35) See “Store” on page 38.
NOTE
●
The PC Adjust Menu cannot be operated when the input signal is digital or a signal
compatible with HDCP.
●
The Auto PC adjust cannot be operated when 480i, 575i, 480p, 575p, 720p, or 1080i is
selected in the Computer System Selection.
(p35)
Computer Adjustment (Auto)
Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for
the input signal from your computer.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Remote Control
LL
LAMP
MENU
SCREEN
SELECT
LAMP
CONTROL
AUTO PC
FREEZE
+
AUTO PC button
The Auto PC adjustment function can be operated directly by pressing
the AUTO PC button on the remote control.
Direct Operation
Menu Operation