Sanyo PLV-1080HD - High Definition 1080p LCD Home Theater Projector страница 18 Скачать руководство пользователя

Страница: 18 / 60

Connect the projector’s AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.

Press the POWER ON/STAND-BY button on the top control or
on the remote control.

The POWER indicator turns green and the cooling fans start to
operate. As the automatic slide shutter opens, a preparation
display appears on the screen and the countdown starts.

After the countdown, the input source that was selected the
last time appears on the screen.

Turning On the Projector

Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.

Selected Input Source

OFF

Main On/Off switch

✔

Note:

• If the automatic slide shutter does not open properly, the projector

will not be turned on and the POWER indicator will blink orange.
Press the POWER ON/STAND-BY button again to restart.

• When “Countdown off” or “Off” is selected in the Display function,

the countdown will not be displayed on the screen (p.40).

• During the countdown period, all operations are invalid.
• Image may look dark for a while after turning on the projector.

Lamp needs some time to stabilize after the power is turned on.
Stored lamp mode and the image mode will be active after the
lamp is stabilized.

• When the shutter is manually closed slightly during projection, the

shutter will be automatically closed.

Automatic Slide Shutter

Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.

Use this tab when handling manually.

Basic Operation

Top Control

Remote Control

POWER indicator

POWER

ON/STAND-By

button

Содержание PLV-1080HD - High Definition 1080p LCD Home Theater Projector





























































Результаты поиска

Содержание PLV-1080HD - High Definition 1080p LCD Home Theater Projector

Отзывы:

Похожие инструкции для PLV-1080HD - High Definition 1080p LCD Home Theater Projector

Бренды по названию

Популярные бренды

Sanyo PLV-1080HD - High Definition 1080p LCD Home Theater Projector, Руководство пользователя

Результаты поиска

Содержание PLV-1080HD - High Definition 1080p LCD Home Theater Projector

Отзывы:

Похожие инструкции для PLV-1080HD - High Definition 1080p LCD Home Theater Projector

Бренды по названию

Популярные бренды