STEP-2 Image Editing
17
English
■
Spherical
This editing is to project on the spherical screen.
Select "Spherical correction
e
" from either "Type(T)" in the menu or the toolbar.
The grid screen for Spherical correction appears.
Basic adjustment
Adjustment points (Points enable to drag.) A to H (The points are different from
editing screen.) are displayed on the screen. Click the nearest intersection point
to the alphabet position, a point will be appear on the grid. Drag this point with a
mouse and edit the grid shape.
You can also adjust with right click of a mouse and arrow key by 0.1 dot unit
after selecting the adjustment points.
If the editing is not appropriate to project on a spherical screen or any of the cor-
ner points of the grid go over the size of the screen, the square grid will disap-
pear. At this stage, you cannot edit each point nor send the data to the projector.
Edit each corner point again to get the correct position then the grid will appear
again and editing becomes possible.
Clue to adjust: First, drag each corner with a mouse pointer and make the grid
screen smaller then start editing.
