Sanyo PID-42NE1, Руководство по эксплуатации

Страница: 39 / 48

3D Y/C Filter (NTSC)
Colour system
Signal
On
Auto
Cinema reality
Off
4:3
[ AV ]
Noise reduction Off
39
Press to select “Noise reduction”.
Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.
Auto: Noise reduction will be automatically selected from “Min”,
“Mid” or “Max”.
Noise reduction
Setup for Input Signals
Note:
Noise reduction can be adjusted while a Video or Component signal is being applied.
Sync
Signal
H-Freq.
V-Freq. kHz
Hz 63.98
60.02
Signal Format 1280×1024/60
[ RGB ]
Cinema reality
Noise reduction
XGA Mode
Auto
Off
Off
1024
×
768
This function operates only during input from PC IN terminal.
Select Signal from the “Setup” menu during Component input signal.
Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input first is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”
Sync
Press to select the “Sync”.
Press to adjust.