2
Safety Notice
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
Product safety should be considered when a component replacement is made in any area of a receiver. Components
indicated by mark
in the parts list and the schematic diagram designate components in which safety can be of
special significance. It is particularly recommended that only parts designated on the parts list in this manual be used
for component replacement designated by mark
. No deviations from resistance wattage or voltage ratings may be
made for replacement items designated by mark
.
!
!
!
1: An isolation transformer should be connected in the
power line between the receiver and the AC line when a
service is performed on the primary of the converter
transformer of the set.
2: Comply with all caution and safety-related notes
provided on the cabinet back, inside the cabinet, on
the chassis or the LCD panel.
3: When replacing a chassis in the cabinet, always be
certain that all the protective devices are installed
properly, such as, control knobs, adjustment covers or
shields, barriers, isolation resistor-capacitor networks etc.
Before returning any LCD to the customer, the service
technician must be sure that it is completely safe to
operate without danger of electrical shock.
Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of seprately.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
RoHS
.This product does not contain any hazardous substances prohibited by the RoHS Directive.
(You will find “R” or “Z” at the last digit of the serial number or an “RSF” label near the rating plate on
the RoHS compliant product.)
WARNING
.You are requested to use RoHS compliant parts for maintenance or repair.
.You are requested to use lead-free solder .
!
!
CAUTION:
When disassembling products of WP and SR, always be certain that protections against both dust and water will be
ineffective.
The service must be conducted with proper equipments according to instruction.
For the process of VACUUM TEST for dust and water protections, please refer to separated instruction.
"SET UP OF VACUUM TEST EQUIPMENT" is taken as
confiden
tial.
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
Product safety should be considered when a component replacement is made in any area of a receiver. Components
indicated by mark
in the parts list and the schematic diagram designate components in which safety can be of
special significance. It is particularly recommended that only parts designated on the parts list in this manual be used
for component replacement designated by mark
. No deviations from resistance wattage or voltage ratings may be
made for replacement items designated by mark
.
!
!
!
1: An isolation transformer should be connected in the
power line between the receiver and the AC line when a
service is performed on the primary of the converter
transformer of the set.
2: Comply with all caution and safety-related notes
provided on the cabinet back, inside the cabinet, on
the chassis or the LCD panel.
3: When replacing a chassis in the cabinet, always be
certain that all the protective devices are installed
properly, such as, control knobs, adjustment covers or
shields, barriers, isolation resistor-capacitor networks etc.
Before returning any LCD to the customer, the service
technician must be sure that it is completely safe to
operate without danger of electrical shock.
Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of seprately.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
RoHS
.This product does not contain any hazardous substances prohibited by the RoHS Directive.
(You will find “R” or “Z” at the last digit of the serial number or an “RSF” label near the rating plate on
the RoHS compliant product.)
WARNING
.You are requested to use RoHS compliant parts for maintenance or repair.
.You are requested to use lead-free solder .
!
!
CAUTION:
When disassembling products of WP and SR, always be certain that protections against both dust and water will be
ineffective.
The service must be conducted with proper equipments according to instruction.
For the process of VACUUM TEST for dust and water protections, please refer to separated instruction.
"SET UP OF VACUUM TEST EQUIPMENT" is taken as
confiden
tial.
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
Product safety should be considered when a component replacement is made in any area of a receiver. Components
indicated by mark
in the parts list and the schematic diagram designate components in which safety can be of
special significance. It is particularly recommended that only parts designated on the parts list in this manual be used
for component replacement designated by mark
. No deviations from resistance wattage or voltage ratings may be
made for replacement items designated by mark
.
!
!
!
1: An isolation transformer should be connected in the
power line between the receiver and the AC line when a
service is performed on the primary of the converter
transformer of the set.
2: Comply with all caution and safety-related notes
provided on the cabinet back, inside the cabinet, on
the chassis or the LCD panel.
3: When replacing a chassis in the cabinet, always be
certain that all the protective devices are installed
properly, such as, control knobs, adjustment covers or
shields, barriers, isolation resistor-capacitor networks etc.
Before returning any LCD to the customer, the service
technician must be sure that it is completely safe to
operate without danger of electrical shock.
Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of seprately.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
RoHS
.This product does not contain any hazardous substances prohibited by the RoHS Directive.
(You will find “R” or “Z” at the last digit of the serial number or an “RSF” label near the rating plate on
the RoHS compliant product.)
WARNING
.You are requested to use RoHS compliant parts for maintenance or repair.
.You are requested to use lead-free solder .
!
!
CAUTION:
When disassembling products of WP and SR, always be certain that protections against both dust and water will be
ineffective.
The service must be conducted with proper equipments according to instruction.
For the process of VACUUM TEST for dust and water protections, please refer to separated instruction.
"SET UP OF VACUUM TEST EQUIPMENT" is taken as
confiden
tial.
All manuals and user guides at all-guides.com
