background image

2

Features

This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions 
are provided below; refer to these descriptions when using the air conditioner.

Microprocessor Controlled Operation

The interior compartment of the remote control unit 
contains several features to facilitate automatic 
operation, easy logically displayed for easy use.

Simple One-touch Wireless Remote Control

The remote control unit has several features to 
facilitate automatic operation.

24-Hour ON or OFF Timer

This timer can be set to automatically turn the unit 
on or off at any time within a 24 hour period.

1-Hour OFF Timer

This timer can be set to automatically turn off the 
unit at any time after one hour.

Night Setback

Pressing this button changes the setting of the 
room temperature thermostat, allowing you to set 
the temperature at whatever level that you find 
comfortable.

Automatic and 3-step Fan Speed

Auto/High/Medium/Low

Air Sweep Control

This function moves a flap up and down in the air 
outlet, directing air in a sweeping motion around the 
room and providing comfort in every corner.

Auto. Flap Control

This automatically sets the flap to the optimum 
position during heating, cooling, and drying 
operation.

Hot Start Heating System

Right from the start, the air is warm and 
comfortable. This system prevents any cold blasts 
at the beginning while the heat pump is warming 
up, or even defrosting.

Automatic Restart Function for Power Failure

Even when power failure occurs, preset 
programmed operation can be reactivated once 
power resumes.

High Power Operation

If not in Auto Operation, the unit operates at 
maximum output for 30 minutes, regardless of the 
desired temperature.
The fan speed is 1 step above “High”. 

Quiet Operation

The fan rotates slower than the fan speed setting to 
provide a quieter operating sound.

ION Operation

While it is operating, the unit generates negative 
ions that freshen up the air in the room.

Anti-Mold Filter

This unit is equipped with an anti-mold filter that 
inhibits the growth of mold and bacteria.

Air Clean Filter

An air filter that eliminates unpleasant odors and 
cleans the air is available.
Purchase a replacement filter at your local dealer. 
(model 

STK-FDXB

)

OI-808-2-EG

01_KMHS0972_EN.fm  Page 2  Monday, October 17, 2005  10:54 AM

Содержание KMHS0972

























Отзывы: