– 11 –
EN
Adjust the volume
1
To increase or decrease the volume, press
VOL +/-
on the remote control.
Volume levels
LED lighting patterns
LED behavior
0 - 5
(6 levels)
Lights up for 3 seconds
(default: level 13)
6 - 11
(6 levels)
12 - 17
(6 levels)
18 - 23
(6 levels)
24 - 29
(6 levels)
•
When pressing
VOL+/-
, the indicator(s) will show the current volume. Pressing
VOL+/-
while the current volume is
shown will increase/decrease the volume.
•
Pressing and holding
VOL+
or
VOL-
will increase or decrease the volume and the Indicator(s) will blink. When the
volume has reached the maximum or minimum, the indicator(s) will stop blinking.
2
To mute the sound, press
on the remote control.
Volume levels
LED lighting patterns
LED behavior
Mute
e.g.) When
OPTICAL
was selected
Red indicator blinks continuously.
•
To restore the sound, press
again or press
VOL +/-
.
NOTE(S)
•
The volume might be influenced by MP3 or Bluetooth player. If the volume is too low, adjust the volume on the
connected device.
•
If the volume level is set above 18 when the soundbar is turned off, the volume will automatically be reset to 18
when the soundbar is turned back on.
