EN
39
9. LIST OF SETTINGS
continued on next page
In “Setup”, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menu.
1.
Press
[HOME]
to access the home menu.
2.
Use
[
]
to select “Setup”, then press
[OK]
.
3.
Use
[
]
to select the desired category, then press
[OK]
.
4.
Use
[
]
to move up and down the list to select menus / options.
5.
To make a selection or to access options of an item, select the desired item, then press
[OK]
.
• To go back to the previous screen, press
[RETURN]
.
6.
Press
[HOME]
to exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category
Menus / Options
Video
TV display
4:3 Normal
4:3 Crop
16:9 Widescreen
16:9 Squeeze
HDMI video
Auto
1080i
480p
1080p
720p
4K
View HDMI video
24p output
Auto
Off
Color space
YCbCr(4:4:4)
YCbCr(4:2:2)
RGB
High Dynamic Range
output
Auto
SDR
Noise reduction
Off
Low
Medium
High
Audio
Dolby DRC
Auto
On
Off
HDMI audio
Bitstream
LPCM
Re-encode
Network
Network installation
Start
Connection Test
View network settings
BD-Live access level
Allow
Limited Allow
Prohibit
