Sanyo FW43D47F, Руководство пользователя

Страница: 31 / 39

USB
Your TV is fitted with a USB connection that enables you to view JPEG
photos or watch Motion JPEG files stored on a USB memory stick.
1
Connect the USB memory stick to the USB terminal on the back of
your TV.
2
Press MENU and use H I to select USB , then press OK .
●
The highlighted text will move to Start now , then press OK again.
device.
pictures and videos via your USB
This menu allows you to enjoy your
USB
Language
Features
Setup
Sound
Picture Start now
3
Use H I to select the
Picture
or
Video
, then press
OK
.
●
These recorded files must meet specifications shown below:
Picture (JPEG)
Upper limit 4000 x 4000 pixels
Video
(Motion JPEG)
Size 320 x 240 (QVGA)
Frame rate 30fps
Audio type LPCM
Sampling frequency
(32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Note(s)
●
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
●
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
●
Up to 255 English characters can be recognized.
●
This unit does not support MTP (Media Transfer Protocol).
●
This unit supports FAT16 and FAT32 file systems.
●
If the file is not supported, an error message appears.
●
When the USB memory stick is not recognized, try reconnecting it again.
●
We cannot be held responsible if your USB memory stick is not supported, nor will we accept
any liability for damage or loss of stored data.
●
To protect your USB memory stick files from being erased place the write protect sliding
tab in the protect position (if available).
●
Be sure to keep a backup copy of the original files on your device before you play them back
on this unit.
●
This unit does not recognize USB memory stick that requires a special driver.
●
This unit is not allowed to use the USB memory stick which requires an external power
supply (500mA or more).
●
A file name exceeding 128 characters or contains a dot character is not supported on this
TV.
●
Progressive JPEG files are not supported.
●
Only a Motion JPEG file with an “.avi” extension is supported. An extension “.mov” is not
supported.
●
During Motion JPEG playback, “Pause”, “Forward” and “Reverse” do not work on this
unit.
Picture (JPEG)
1
Use H I to select the desired file, then press OK .
1 2 3 4
Press "OK" key to play/pause.
Thumbnails
Image5.jpg
Image4.jpg
Image3.jpg
Image2.jpg
Image1.jpg
Image1.jpg
Picture
Picture
1024:768
2009/04/02 17:42:06
Image1.jpg
Go to root folder
●
To toggle between List and Thumbnails press the NUMBER 2
key each time.
●
The unit goes to the slide show automatically.
To pause / play the slide show, press OK .
●
Use the NUMBER keys ( 1 through 4 ) to see the file details ( )
or change the following settings ( ~ ).
See the description in table below.
Item Detail
More detail
Press 1 to display file details below.
Name
,
Album
,
Date
,
Size
or
Next
.
Press 1 again to remove file details.
Start show
Press
4
or
OK
to start the slide show.
While the slide show is on, the following 2 settings will be displayed.
Transitions
Press 2 , then use H I to select the transition mode choosing from;
None , Dissolve , Wipe right , Wipe left , Wipe up , Wipe down , Box
in or Box out .
Slide time
Press
3
, then use H I to change the display time choosing from;
Short , Medium or Long .
Stop show
Press 4 or OK to stop the slide show.
While the slide show is off, the following 2 settings will be displayed.
Repeat
Press 1 , then use H I to select the repeat mode choosing from;
Off , One or All .
Rotate
Every press on 2 will turn the picture clockwise by 90 degrees.
Zoom
Press 3 , then use H I to select the zoom factor (1x, 2x or 4x). Press
OK to set the zoom factor.
31 .
English
Continued on next page.