Sanyo ECO G SPW-GU055XH, Технические данные и руководство по обслуживанию, Страница: 124 / 242

3-78
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
How to Clear Programs
Press the PROGRAM button.
To cancel specific days To cancel individual programs on specific days
When the PROGRAM button is pressed, the group No.
and the present day of the week start blinking and the
present time indication changes to a blinking “PG-1”.
Press the GROUP button to select a group to clear.
NOTE
Group selection may be disabled during installation. If so,
proceed to the next step.
Holding down the CANCEL button for more than 2 sec-
onds returns the program to the point prior to pressing the
PROGRAM button. (All operations made up until that point
are cleared.)
Select a day to cancel using the DAY button and press the
CLEAR button. All settings in programmed operations
through are cleared. The display appears as shown
above.
Press the PROGRAM button to enter the clear operation.
The normal display returns without the program schedule
marker
underneath the days of the week.
Select a day and press the SET button.
Programmed operations
through start blinking in
rotation, therefore press the CLEAR button when the pro-
grammed operation to clear starts blinking. (The remaining
programmed operations are automatically arranged in the
order of earliest time first.)
Press the PROGRAM button to enter the clear operation.
The normal display returns.
Example:
Display after clearing programmed
operation
above