background image

9

SAFETY.AND.CARE

•  Heat sources – Keep the product away from heat sources, such as radiators,  

  stoves, heaters, and other heat-generating products.

•  Water and moisture – Do not use the product in or near water or in high    

  moisture areas, such as a bathroom. 

 

 

 

 

   

 

 

 

 

 

 

 

 

Caring.for.your.product

•  Do not clean any part of your phone with benzene, thinner or other solvent  

  chemicals as this may cause permanent damage that is not covered by the  

  warranty. When necessary, clean it with a damp cloth.
•  Keep your phone away from hot, humid conditions or strong sunlight.

•  Never immerse the unit in water or use your phone outdoors in the rain,    

  or handle it with wet hands.
•  Do not subject the base unit to extreme force, shock, or fluctuations in    

  humidity.
•  Do not tamper with the internal components or disassemble the unit.

•  Every effort has been made to ensure the highest standards of reliability for  

  your phone. However, if something does go wrong, do not try to repair it    

  yourself – consult your supplier.   

 

 

 

 

   

 

 

 

 

 

 

 

Caution

•  Dispose of old, defective batteries in an environmentally friendly manner in  

  accordance with the relevant legislation.For information, go to www.rbrc.ca
•  No exposed flames, such as lighted candles, should not be placed near the  

  apparatus.

• 

Never.

use your phone in the open air during a thunderstorm – unplug the  

  base unit from the phone line and the main socket when there are storms in  

  your area.

• 

Do.not.

install the base unit near a sink, bath or shower, or anywhere else  

  where it could get wet. Electrical equipment can cause serious injury if used  

  while you are wet or standing in water.

•  If the base unit ever falls into water, 

do.not.

retrieve it until you have  

 

  unplugged the power lead from the mains and the phone line plug from the  

  phone socket; then pull it out by the unplugged cables.
•  When handling batteries exercise care. Contact with conductive materials  

  can short the batteries. To avoid the risk of fire, 

never

 use non-rechargeable  

  batteries.

Содержание CLT-D6614












































Отзывы: