SANY SY95C, Руководство по эксплуатации и обслуживанию, Страница: 109 / 166

MAINTENANCE
5-11 SY95C Excavator OMM
Lubrication and Maintenance Charts
Lubricants minimize wear between moving parts.
Insufficient lubrication will lead to excessive wear and
damage to components. Engine oil is critical for engine
operation. Never use lubricants that are not
SANY-approved.
Clean grease fittings before applying grease. Use a
grease gun to pump grease into the fitting until old
grease begins to escape. Clean off any grease that has
escaped.
Shown below are the lubrication points that must be
maintained according to the lubrication chart. See
“Lubrication Points” on page 5-41.
0003871
Figure 5-1
Lubrication Chart
Item Maintenance Items
Qty. of
Fittings
Lubrication Interval
Lubricant
50 hr. 100 hr. 250 hr. 500 hr.
1 Arm cylinder pins 2
Grease
2 Boom to arm connecting pin 1
3 Boom pin 1
4 Swing gear 1
5 Swing pinion gear 1
6 Swing bearing 2
7 Dozer blade linkage pins 2
8 Dozer blade cylinder pins 2
9 Boom cylinder pins 2
10 Bucket linkage pins 3
11 Bucket cylinder pins 4
1
2
1
11
10
11 10 7
6
3
8
9
5
4