SANY SY60C, Руководство по эксплуатации и обслуживанию

Страница: 93 / 160

MACHINE OPERATION
4-29 SY60C Excavator OMM
Park the Machine
1. Move the machine to a solid, level surface.
0002926
Figure 4-69
2. Lower the bucket and dozer blade to the ground.
3. Move the throttle control dial to MIN (low idle). Run
the engine at idle for 5 minutes to cool it down.
0002764
Figure 4-70
4. Move the hydraulic lockout control lever (1) to the
locked (closed) position (2).
5. Turn the key switch to OFF and remove the key.
6. Close the windows and cab door.
7. Turn the battery disconnect switch to OFF.
8. Close and lock all doors.
Parking the Machine on a Grade
0002928
Figure 4-71
WARNING
Avoid parking the machine on a grade when
possible. Machine may become unstable and roll
over. Failure to follow this warning could result in
death or serious injury.
If it is necessary to park the machine on a grade:
1. Face the machine uphill.
2. Firmly set the bucket teeth and dozer blade into the
ground.
3. Move the hydraulic lockout control lever to the locked
(closed) position.
4. Turn the key switch to OFF and remove the key.
5. Close the windows and cab door.
6. Turn the battery disconnect switch to OFF.
7. Close and lock all doors.
8. Securely chock the tracks.
2
1
1