SY26U Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 1119
4-7
T
ABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Engine Oil Level Check
1. Park the machine for maintenance. See “Maintenance
2. Open the engine hood.
3. Remove the dipstick (1) and wipe the engine oil off
with a clean cloth.
4. Fully insert the dipstick into the dipstick opening, then
remove it and note the oil position on the dipstick.
5. The engine oil level must be maintained between the
upper mark (2) and lower mark (3) of the dipstick. Add
clean engine oil until the oil level is at the upper mark of
the dipstick.
WARNING!
Hot engine oil and components may cause burns or other serious injury. Allow the engine to
cool before performing engine maintenance.
Failure to follow this warning could result in death or serious injury.
NOTICE!
Do not add oil past the upper mark on the
dipstick, as this may result in engine damage.
Fig. 4-2
0003219
1
Fig. 4-3
0002770
2
3
