SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
2-7
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Electrical Fires
Short circuits, damaged wiring, or overcharged batteries can cause fires. Observe the following:
•
Check the wiring on the machine for damage when doing a prestart check. Contact a SANY dealer to
repair or replace any damaged wiring.
•
Make sure the battery is operating in its recommended range.
•
Never install aftermarket electrical equipment without approval from a SANY dealer.
Fire Extinguisher
Always keep a fire extinguisher on the machine. Read the instructions on the fire extinguisher carefully, and know
how to use it in an emergency.
Inspect the condition of the fire extinguisher daily. If damaged, replace the fire extinguisher immediately.
Make sure the fire extinguisher is within the listed inspection period. Replace the fire extinguisher immediately if it
has reached its expiration date.
The fire extinguisher must be at least a 2.5 lb. Class ABC rated fire extinguisher (National Fire Protection
Association [NFPA] 10 Standard for Portable Fire Extinguishers).
In Case of Fire
If a fire occurs on the machine:
1. Immediately press the emergency stop to shut down the machine. Never continue operating the machine.
2. Get clear of the machine and immediately call for help. Always have a list of emergency phone numbers
available.
3. Exit the area and remain clear of the machine until the fire response team gives permission to come near the
machine.
4. If using a fire extinguisher, always aim the extinguisher nozzle at the base of the fire.
Crushing Hazard
Keep your body inside the cab during operation or travel.
Keep all guards in place on the machine.
Never remove the side windows of the machine. If a window becomes damaged or broken, replace it immediately.
Block off the area where the machine is being operated and keep all unnecessary personnel out of the work area.