SANY SY135C, Руководство по эксплуатации и обслуживанию

Страница: 48 / 278

Machine Controls SY135C Excavator
3-10
Operation and Maintenance Manual — 0120
SANY
Fuel Tank Filler Cap
Opening the Filler Cap
Fig. 3-12
0003017
4
3
2
1
1. Open the lock shield (1) on the filler cap (2).
2. Insert the key into the lock.
NOTE: The key may break if it is turned before it is
fully inserted into the lock.
3. Turn the key from the lock position (3) clockwise until
the lock points to the open position (4). Remove the
filler cap.
NOTICE!
To prevent damage to the filler caps:
• Make sure the O-ring on the filler cap is clean. If the O-ring is contaminated by dirt or
debris, the O-ring could be damaged and not seal improperly.
• Inspect the O-ring for wear or damage, replace if necessary.
• Make sure the filler cap is fully seated before turning the key to lock/unlock the cap.
• The key slot shield covers the key slot after the key is removed to prevent dirt and debris
from entering the lock.
Failure to follow this notice could damage the machine or cause it to operate improperly.