Wall-mount washer
Wall-mount screw
Resin plug
Main unit
Washer
Main unit fixing screw
Wall-mount washer
Wall-mount screw
Resin plug
Main unit
450
Main unit fixing screw
Bath Accessories
Tubo
Instruction Manual
(with warranty card)
EN-03-TUB01T-00
Thank you for purchasing this Sanwa Company product.
Please be sure to read this instruction manual to use this product safely.
●Safety Precautions
Observe the following precautions to prevent injury and
property damage.
WARNING
Death or serious injury can result from failing to observe the following items:
Do not disassemble or alter.
This may result in an accident.
Use at least 12mm-thick plywood as a
basis for the installation surface.
Otherwise the product may fall, leading to injury.
If the installation surface is thin, apply
at least 30mm-thick reinforcement ma-
terial before installation.
Doing so may result in the product breaking or
someone being injured.
CAUTION
Serious injury or property damage may result from failing to observe the following:
Do not hang any articles of value or
fragile items on the product.
Otherwise it may fall, leading to injury.
If you install the product to any
frame such as a concrete bed, use
the supplied concrete plug or a
commercially available concrete
plug to secure it.
Otherwise it may fall, leading to injury.
Do not lean on or stand on the prod-
uct.
Otherwise it may fall
and
result in the product
breaking or someone being injured.
The screws used for the product
are sharp. Please keep them in a
safe place.
Otherwise it may result in injury. Especially,
keep them away from children.
Do not install the product on a wall
without backing, tiles with no fixing by
plugs or concrete surfaces.
Otherwise it may fall
and
result in the product
breaking or someone being injured.
Be sure to wear work gloves during
installation and adjustment.
Otherwise it may result in injury.
* Use the resin plug when the wall may not be strong enough.
* Use the resin plug when the wall may not be strong enough.
1
Name of parts
1
PROHIBITED
REQUIRED
ATTENTION
Precautions are classified into categories using the symbols above.
◎
Tubo
●
Towel ring / Paper holder
●
Towel bar
<Normal care>
Wipe the product with a damp cloth or sponge and then with a dry cloth.
* Do not leave water droplets as this may leave water scales.
<When cleaning>
❶
Remove dirt with a cloth or sponge with mild detergent.
❷
Wipe off the detergent with a damp cloth and then with a dry cloth.
1
Care Procedures
2
○ Do not use any steel or nylon wool, etc.
(This may scratch the product surface.)
○ Do not use organic solvents such as alcohol and thinner, acidic/alkaline detergent or
cleanser.
(It may result in discoloration or deterioration of the product.)
<Precautions before installation>
● Unpack the product and check that there is no damage to any of its external surfaces.
* Damage discovered after installation is not covered by the warranty.
<Check list before installation>
* Use at least 12mm-thick plywood as a basis for the installation surface.
* If the wall is thin, apply at least 30mm-thick reinforcement material before installation.
* If the installation surface is a concrete bed, use supplied or commercially available plugs
for installation onto concrete.
1
Check list before installation
3