Sanus Systems VisionMount VM200 Скачать руководство пользователя страница 1

Assembly Instructions for Model: VM200

Thank you for choosing a Sanus Systems VisionMount™ wall mount. The VM200 is designed to mount up to 40″ LCD TVs weighing less 

than 80 lbs [36.3 Kg] to a vertical wall. It will allow you to effortlessly tilt the TV ±20°

    CAUTION: The size and weight of your television must not exceed 40” [1016 mm] diagonally and 80 Lbs [36.3 Kg]. The wall must 

be capable of suporting five times the weight of the televison plus the wall mount. Never use defective parts. Improper installation 

may cause property damage or personal injury.  Do not use this product for any purpose that is not explicitly specified by Sanus 

Systems.

If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact 

Sanus Systems at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist you with installation questions 

and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Check 

carefully to make sure that there are no missing or defective parts. Sanus Systems can not be liable for damage or injury caused by incorrect 

mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase

NOTE: The supplied wall mounting hardware is not for metal stud or old cinder block walls. If you are uncertain about the nature 

of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware is 

included. If the hardware you need is not included please consult your local hardware store or call Sanus Systems.

Required Tools: 

Drill, 3/16″

 

drill bit, (1/2″ masonry bit for brick, concrete, or concrete block installations), wrench set, phillips screw 

driver

Supplied Parts and Hardware: 

(All threaded fasteners are shown full size.)

Sanus Systems 

 2221 Hwy 36 West, Saint Paul, MN 55113  06.08.06 (6901-100024)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Wall Plate - A

Qty. 1

Left Monitor Bracket - B

Qty. 1

Right Monitor Bracket - C

Qty. 1

Lag Bolt - D

Qty. 3

Lag Bolt Washer - E

Qty. 3

Concrete Anchor - F

Qty. 3

M4 x 12 mm Bolt - G

Qty. 4

M6 x 12 mm Bolt - I

Qty. 4

M5 x 12 mm Bolt - H

Qty. 4

M6 x 35 mm Bolt - L

Qty. 4

M5 x 30 mm Bolt - K

Qty. 4

M4 x 30 mm Bolt - J

Qty. 4

M6 Washer - Q

Qty. 4

M4 Lock Washer - M

Qty. 4

M6 Spacer - S

Qty. 4

M4/M5 Spacer - R

Qty. 4

M4/M5 Washer - P

Qty. 4

M6 Lock Washer - O

Qty. 4

M5 Lock Washer - N

Qty. 4

Содержание VisionMount VM200

Страница 1: ...ot be liable for damage or injury caused by incorrect mounting incorrect assembly or incorrect use Please call Sanus Systems before returning products to the point of purchase NOTE The supplied wall mounting hardware is not for metal stud or old cinder block walls If you are uncertain about the nature of your wall consult an installation contractor Sanus makes every effort to assure all necessary ...

Страница 2: ... Washer P Q Monitor Bracket B C and finally into the TV Make sure the Monitor Brackets B C are vertically centered and level with each other Tighten the Bolts G H I securing the Monitor Brackets B C to the monitor M4 Diameter Bolt M6 Diameter Bolt M5 Diameter Bolt P C M G P C N H Q B O I Diagram 1 Tension Knob Tension Knob NOTE If the horizontal distance between the threaded inserts on the back of...

Страница 3: ...and finally into the TV Make sure the Monitor Brackets are vertically centered and level with each other See the appropriate Diagram below Tighten the Bolts J K L securing the Monitor Brackets B C to the monitor M6 Diameter Bolt M5 Diameter Bolt M4 Diameter Bolt P C M J R P C N K R Q B O L S Diagram 2 Tension Knob Tension Knob NOTE If the horizontal distance between the threaded inserts on the bac...

Страница 4: ... is flush with the concrete brick surface even if there is a layer of drywall or other material in front then attach the Wall Plate A to the wall using three lag Bolts D an three Lag Bolt Washers E See Diagram 3B for assistance Step 4 Attach Monitor to Wall Plate CAUTION Some televisions may require two people to lift Sanus is not responsible for personal injury or product damage Rotate the Latch ...

Отзывы: