SANTOS : User and maintenance manual
IMPORTANT SAFEGUARDS
When using, cleaning or maintaining the machine, always follow these instructions:
Read all instructions
Note: For easier understanding of the sections below, please refer to the diagrams
at the end of the manual
IMPROPER USE
1. Do not use this appliance for grinding anything other than roasted coffee beans.
2. Never operate the appliance with no coffee beans in the bean container.
3. Remove from the coffee beans any foreign bodies which may damage the grinding
wheels (metal staples, stones, etc.).
4. For electrocution risk protection reasons, never plunge the base into water or any
other liquid.
5. Never touch the moving parts.
6. Never operate the appliance with no coffee beans in the bean container.
7. Unplug the appliance before carrying out any work on it: cleaning, maintenance or
repair.
8. The use of spare parts other than certified SANTOS original parts is prohibited.
ELECTRICAL CONNECTION:
•
The electric power supply for the machine is available in 3 single-phase voltages:
-
110-120 V 50/60 Hz
-
220-240 V 50 Hz
-
220-240 V 60 Hz
Line protection: the machine should be connected to a standard 2-pole + earth electric
socket. The installation should be fitted with an RCD and a fuse rated at 16A.
The
appliance must be earthed
(fig. B)
CARE:
•
Before connecting the machine, check that the mains electrical voltage is the same
as the voltage for your appliance. Its value is shown:
¾
either on the identification plate (
16
) under the machine.
¾
or on the identification plate on the last page of this manual.
•
If the power cable (10) is damaged, it should be replaced by a special unit available
from SANTOS or from approved SANTOS dealers.
!
98140 US 3.0 - 05 2007
4
/ 20
www.santos.fr
