Bedienungsanleitung / User manual VTC-262PWD / VTC-274PWDU
_________________________________________________________________________________
- 30 -
1. Items included in the delivery
1 x camera VTC-262PWD or VTC-274PWDU
1 x cable adapter BNC socket/plug
1 x RJ-45 adapter on screw-type terminal
(only for camera VTC-274PDWU)
2 x screws
1 x user manual
2. Installation
(Also see the pictures on the following pages.)
This camera is a colour dome camera. It has been developed for indoor CCTV applications.
You will find the technical data at the end of the manual.
2.1 Camera mounting
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
2.2 Power supply and monitor impedance
Only use a stabilised 12 V DC or 24 V AC power supply unit with sufficient wattage (see
chapter “Technical specifications” for recommended power supply units).
Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
Power supply and video output see picture 7a/b.
A cable adapter BNC jack/plug is included in the delivery which can be put onto the
additional video output, e.g. to connect a monitor during the camera installation phase in
case the regular cable has already been laid (picture 2).
2. 3 Camera housing
Open the camera housing by carefully turning it counter-clockwise (see picture 1).
Close the camera housing by carefully turning it clockwise (see picture 1).
Clean the dome after the installation.
Improper handling of the appliance will invalidate the warranty.
