ZEPOB
Studio Quality
Wireless Headphones
OVERVIEW
OPERATION
Thank you for purchasing the Zebop Studio Quality Wireless
Headphones. Please read these instructions carefully for proper
operation and save for future reference.
Turning ON/OFF
Power ON: Hold the Power On/Off button until the LED
indicator flashes green/blue.
Power OFF: Hold the Power On/Off button for 5 seconds.
Release the button, then the headphones will turn off.
Connecting with Bluetooth
To play audio from a Bluetooth device, you need to pair the
device with your headphones.
1. Turn on the headphones. The light blinks green and blue,
indicating the headphones are ready to connect with your
Bluetooth device.
2. Turn on Bluetooth mode on your device.
3. Select “Santana Zebop” to initiate pairing, and the
headphones will automatically connect with your
Bluetooth device, indicated by a green light and
voice prompt “Connected”. Some devices ask you
to input the PIN “0000” as the password.
Note: Generally, there is a 5 minute maximum to pair the
headphones with your Bluetooth device, otherwise retry
steps 1 to 3 to pair again.
Connecting to a Micro TF Card
1. Insert the micro TF Card into the TF Card slot on the
headphones.
2. Turn on the headphones. The LED indicator flashes blue,
and now you can play music from your TF Card.
Note: The headphones can only support a TF Card up to 32GB.
VOLUME (+)
CHARGING PORT
MIC
AUX INPUT
TF CARD
LED
POWER ON/OFF
MODE BUTTON
MFB
(PHONE/PAUSE/PLAY)
VOLUME (–)
