Santa Fe Clasic 4029700, Инструкция по установке и эксплуатации

Страница: 11 / 16

SANTA FE CLASSIC DUCTABLE INLET MOUNTING
Ductable Inlet Instructions
1. Remove the Filters from the unit.
2. Remove the ductable inlet from the box and remove the
release paper from the tape on the inlet flanges.
3. Center the inlet above the filter guides and attach the inlet to
the guides.
4. Replace the filters in the unit.
Exhaust Collar Mounting Instructions
5. The six inch opening may be used as a fresh air inlet from
outside.
6. Remove the exhaust collar from the box and bend the tabs in.
7. Place the collar over the blower outlet and line up the tabs
with the holes in the cabinet.
8. Using (4) screws from the kit, attach the collar to the unit.
Ductable
Inlet
Exhaust
Collar
11
Santa Fe Classic Installer’s & Owner’s Manual
IMPORTANT!
DO NOT DRILL ANY HOLES IN THE CABINET.