Sansui HDPDP4200, Руководство пользователя

Страница: 12 / 40

12
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to the Plasma Display is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate
your particular assortment of components. The diagrams are intended to show component video and audio
interconnections only.
To connect the Plasma Display to a VCR with an S-Video cord
If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the Plasma Display, you must
also connect the audio cords to the AUDIO IN jacks on the rear of the Plasma Display. The S-VIDEO cord only
carries the video signal. The audio signal is separate.
NOTE:
When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takes
precedence over the video cord.
To S-Video OUT
To Audio OUT
Audio cord (not supplied)
S-Video cord (not supplied)
To S-VIDEO IN 1 (or 2)
To connect the Plasma Display to a VCR
Rear lower of the Plasma Display
To Audio/Video OUT
Audio/Video cord (not supplied)
To AUDIO/VIDEO IN 1 (or 2)
To AUDIO
IN 1 (or 2)
Rear lower of the Plasma Display
3V00101A_En_p12-16 6/2/05, 4:40 PM 12