INSTALLATION AND ADJUSTMENT
12
§3.6 Assembling the equipment (TIG)
Ar
workpiece
DC POSITIVE CONNECTION
torch
real panel
front panel
Argon gas
cyclinder
Gas hose
Shield gas
input joint
Shield gas
connector
Aero
socket
Return current
cable
Control cable of
torch switch
pipe
Negative
output
Positive
output
Welding cable
SANARG
180AP
SANARG
180AP
Note: the red and blue water pipes on front panel are connected with gun.
the red and blue water pipes on real panel are connected with water box.
⚫
Workpiece is connected to the positive electrode of welding machine, and welding torch is
connected to the negative electrode, which is called DC POSITIVE CONNECTION;
otherwise, that is called DC NEGATIVE CONNECTION. Generally, it is usually operated in
DC POSITIVE CONNECTION in TIG welding mode.
⚫
The control cable of torch switch consists of 2 wires, pedal control of 3 wires and the aero
socket has 14 leads.
⚫
Consumable parts for TIG torch, such as tungsten electrode
、
tip
、
gas nozzle
、
electrode
shield(short/long) , please enquire us by mail or phone according to the accessory codes.
⚫
When SANARG 180AP welding machine is operated in HF ignition method, the ignition
spark can cause interferences in equipment near the welding machine. Be sure to take
specially safety precautions or shielding measures.