Sanremo 6713, Инструкция пользователя

Страница: 19 / 96

YOU Transport, unpacking and components
19
TRANSPORT, UNPACKING AND
COMPONENTS
5 UNPACKING AND POSITIONING
IMPORTANT: unpacking and
positioning operations must be
performed by a specialized and
authorized technician.
In order to prevent risks of
contamination, we recommend
unpacking the equipment only when
it is installed.
5.1 UNPACKING THE MACHINE
- The following operations must be performed by at
least two operators;
- Always check the conditions of the package:
inform the carrier if damaged;
- Open the top of the package and lower the tabs;
- Pull out the accessories: supplies and technical
documentation (manuals);
- Loosen the four locking devices;
- Lift the top part;
- Open the cellophane and lift the machine
HOLDING IT BY ITS BASE;
- The elements of the package (box, cellophane,
metal staples, etc.) can cut or injure if not handled
with care or used improperly; keep away from the
reach of children or unsuitable persons.
ATTENTION: packaging elements
(plastic bags, cardboard, nails, etc.)
must NOT be left within the reach of
children as they may be source of
danger.
Any damage, malfunction or
non-conformity must be timely
communicated, in any case within
8 days from receipt of the machine.
Otherwise the goods are deemed
accepted.
5.2 MACHINE POSITIONING
Position the machine in its final location, checking
that:
1. the support cabinet is sufficiently sturdy and stable,
considering the machine weight, well levelled, dry
and smooth and positioned at a height of more than
35 in above the ground;
2. there are at least 4 in between the rear wall of the
machine and the walls of the room, to allow proper
ventilation;
3. the top part of the machine (cup heating plate) must
be at a height of not less than 59 in from the floor;
4. prepare an electrical panel, a water drain and
a water supply tap near the machine for water
connection;
5. do not use or install in locations where water jets
are used;
6. to ensure normal operation, the device must be
installed in places where the temperature is between
+41°F and +89°F and the humidity does not exceed
70%. If the machine is exposed to temperatures
below + 32°F, proceed as follows: make sure that
the machine has been stored for 24 hours in a
place where the temperature is above +59° before
switching on. The machine is electrically powered.