SANO Liftkar MTK 190, Руководство по эксплуатации

Страница: 5 / 16

Page 5
down
up
3. Dear user of LIFTKAR
This brochure makes you familiar with the handling of LIFTKAR.
It is for your own benefit, to read this operating manual very carefully. You are avoiding
transport damages and after a short time of exercising you will be able to use this transport
device with all its advantages.
In order to update you about product news as well as technical changes (e.g. options,
accessories) we ask you to register your product online.
http://www.sano.at/en/product-registration
3.1. Safety measures
1. Start exercising with a low-weight load only.
As soon as you are perfectly handling the system of LIFTKAR, you can increase the
weight up to full load.
2. Keep out of the danger area beneath the cargo.
3. The load has to be fastened at the frame of LIFTKAR by the strap bar.
4. Lifting the load on level ground (that means without steps) only by switching
direction UP (see picture at the bottom of the page). Till maximum height is reached!
Descending by switch direction DOWN (see picture)
Do not descend by switching direction UP: that means: After having reached the
maximum height the switch direction UP must not be used further, as undesirable
accelerations could accur.
5. For maintenance work and repairing you must remove the battery unit.
6. Wear only working clothes and shoes in due order to avoid injuries and accidents
caused by stumbling over or being caught.
4. Starting operation
Put the charged battery unit in its place and insert the plug.
The yellow control LED at the cover of the motor unit is lightning.
The crank drive system is switched on by pressing the tumbler switch at the upper or lower
handhold (see picture).
Always pull out the plug after use!
If the plug socket remains inserted more than 24 hours, there is a risk of discharging too
much and the batteries could be permanently damaged.