Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 59 / 136

- 57 -
C
h
ap
ter
5
-
57
-
5-5 Special functions
5-5 Special functions
5-5-1 Copy function operation
The so-called copy function is the function which transfers the function code data to other inverters after transferring
the function code data from one inverter side to the operation panel.
The copy function is an effective function where several inverters need to be set with the same function code data.
Only 1 inverter is set, while other inverters can also receive the same function code data, thus the same function
code setting can be easily implemented.
※
The copy function can be implemented only when the inverter stops working. Therefore, this operation shall be carried out
after the inverter has been stopped.
Operation example: copying from the inverter to the operation panel
Operation Display Description
Select function code F1601 (copy function)
or
(press)
Press the
（
Set
）
key or quick knob, then the set value of
function code will be displayed.
Turn the quick knob to select 1
When F1601 = 1, the current value of the function code data
will be transferred to the operation panel (*1)
Press the (Set) key to start transferring data. And a
flashing
is displayed on 7-segment monitor.
After transfer is
completed When data transfer is completed, the display will return to
function code selection interface.
*1: When the value is set to 2 or 3, then the saved contents of the operation panel will be transferred to the inverter.
And then, a flashing will be displayed on 7-segment monitor.
See the contents of function code F1601 of the function and its operation method.