Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 58 / 136

- 56 -
5-4 Function code display mode
5-4-4 Signed operation
For some function codes, they can be set with values containing signs (polarity).
Operation example: setting F1503=-5.0
Operation Display Description
or
Display of status monitor (frequency display)
Press key, then the screen will display function block
selection interface
Turn the quick knob to select the target function module.
or
（
press
）
Press the
（
Set
）
key or quick knob, then the function code
selection will be displayed.
Turn the quick knob to select the target function code.
or
（
press
）
Press the
（
Set
）
key or quick knob, then the set value of
function code will be displayed.
Turn the quick knob to select the new setting, and the sign
will be displayed only when it is negative. (If the value is +
5.0, it will be displayed as
）
Press the
（
Set
）
key to confirm the new setting, and the
display will return to function code selection interface.
（
*1
）
or
Press the
（
Back
）
key or key, and the display will
return to function block selection interface.
or
or
Press the
（
Back
）
key or key again, and the display
will return to status monitor mode interface.
* 1 Please press or key to return to the function code selection interface.