Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 56 / 136

- 54 -
5-4 Function code display mode
5-4-2 Basic operation
The basic operation is used for changing the value of a function code.
Operation example: setting F1414=10
Operation Display Description
or
Display of status monitor (frequency display)
Pressing the key shows the function block selection
Turn the quick knob, then the function block number will
change accordingly.
Select the target function module.
or
（
press
）
Press the
（
Set
）
key or quick knob, then the selected
function code will be displayed
By turning the quick knob, you can select the target function
code.
or
（
press
）
Press the
（
Set
）
key or quick knob, and the set value of
function code will be displayed.
Turn the quick knob, and select the new settings
Press the
（
Set
）
key to confirm the new setting, and the
display screen will return to function code selection.
（
*1
）
or
Press the
（
Back
）
key or key, and the display screen
will return to function code selection.
or
or
Press the
（
Back
）
key or key, and the display screen
will return to status monitor mode.
*1 If a new value is not required, the display can be switched back to the function code selection interface through (Back)
key or
key.