background image

                                                                 

UHF Wireless microphone system

 

 

10 

RECOMMENDATIONS 

How to use the Belt-pack wireless transmitter properly 

1. Belt-pack transmitter 

utilize a separate 1/4 wavelength whip 

.The effect will be 

reduced when the antenna be winded or touched by the user’s body. 

 

2. Adjust the sensitivity moderately based on varies audio resources and microphones.   

3.  when  using a Lavalier  Microphone, in order to reduce  the variations to  minimum 

when  the  user  turns  his  or  her  head  away  from  the  microphone,  attach  the 

microphone as centrally as possible .Attach the microphone carefully and conduct 

the cable so that nose due to friction is avoided. 

4.  Always  position  the  microphone  at  the  corner  of  the  mouth.  You  can 

increasing/decreasing  the  bass  by  adjusting  the  talking  distance  to  the 

microphone. 

5. When Lavalier Microphone used for live sound reinforcement, make sure that the 

sound inlet is directed towards the mouth, speaker should be select and layout to 

reduce the acoustic feedback in principle, in particular prone to acoustic feedback 

of occasions, match acoustic feedback suppression. 

How to use the hand-held wireless microphone properly 

1.    Hold the middle part of the microphone body. Holding too close to the sound inlet 

basket will affect the microphone’s pick-up pattern, holding it at the lower part of 

the body will reduce the transmitter’s range. 

2.    You can vary the bass reproduction by increasing/decreasing the talking distance 

to the microphone. 

How to use the wireless conference transmitter properly 

1.    Wireless  conference  transmitter  using  internal  antenna wave  antenna  Bullwhip, 

the antenna can not contact the body directly and it should not be entangled with 

the microphone, otherwise the effect would be reduced. 

2.    It will generate plops if the Speaker and the front-end of the sound 

head close too much, conversely the sensitivity will descend, to solve the 

problem you have to turn up the volume in the live, but lead to harsh 

Содержание SKW-101

















Отзывы: