- 1 -
Version
:
30010900210219
A9036T Addressable Optical Smoke and Heat Multisensor Detector
Read through these instructions before using this device to ensure correct installation and use!
1.
Product overview
The A9036T point composite smoke and temperature
fire detector (hereinafter referred to as the detector) is
composed of a smoke sensor and
dual heat sensors.
It not only has the performance of
photoelectric
smoke
fire detector, but also has the performance of heat detector.
The detector is made of non-polar two bus, which can be
used with
fire alarm control panel produced by our
company.
2.
Product features
Dual heat sensors
The low profile design of the Optical/Heat Multisensor detector Detector is sleek and evolutionary, with a 360° LED
indicator which illuminates red when in alarm.
Non-polarity, two-bus connection that ensures convenient installation and maintenance.
It can realize electronic coding and rewrite the address via coder in site.
Within a single-chip MCU, it can realize real-time data acquisition and processing, realize a curve tracing for the field
situation.
It has a temperature, humidity and dust accumulation drift compensation function and a sensor fault detection
function (fault reporting to fire alarm control panel).
A sophisticated dynamic algorithm, providing transient rejection and compensation for drift whilst maintaining
accurate sensitivity.
Reference to Table 1, the detector has five modes.
Working mode can be set with a coder.
Table 1 Optical Heat Multisensor detector modes
MODE
FUNCTION
1
heat sensor in A2R
optical sensor
2
heat sensor in A2
optical sensor
3
heat sensor in A2R
-
4
heat sensor in A2S
-
5
-
optical sensor
3.
Technical data
Executive standard
:
EN54-5 & EN54-7
Operating voltage: 24V (pulse modulation)
Work indication: The red indicator will blink in the monitoring status or remain lit in the alarm status
Coding mode: It can realize electronic coding via coder in site. Address codes 1 to 324 are available for selection
Wiring method: non-polarity two-bus system (L1, L2)
Operating environment: Indoor, temperature:
-
10℃
~
+55℃; relative humidity: ≤95% (non-condensing
or icing
)
External dimensions: diameter: 100mm, height: 58mm (with the base)
Weight: about
123g
(with Base)
4.
Appearance and dimensions (see Fig.1)
Fig.1(unit:mm)