3.
4.
1.
2.
3.
5.
Connect the
to the EXP100.
stand
Line up the
with the stand of the Sangoma phone. (This will ensure stability during regular operation)
stand
Place the stand into the left most slots of the EXP100
Press down slide to the right to lock the stand in place
Stand
Slide stand into position
Final Locked Position
Insert the supplied
cable into the EXP100 Power connector hole and the Sangoma Phone
Port
power connector
Ext
This will provide power to the EXP100 once the Sangoma Phone is powered on
Power Connector Cable
If you are connecting multiple EXP100s to your Sangoma Phone,follow the same procedure indicated above- Line up the
Connector sheet between the EXP100s and use the thumb screws to tighten
If the EHS port on your Sangoma Phone is already occupied by an EHS adaptor, you will not be able to provide power to your
EXP100 in this way. You will need to, instead, plug the
(sold separate) directly into the power port on the
Power Adapter
EXP100
