SANGFOR IAM v2.1 User Manual
280
Select a line and name it; configure the [Preset Bandwidth] and [Connection Mode] according to
the actual information of the line; and then click the <OK> button to complete configuring this
line.
[Static IP]: If the interface IP address is a static IP address, type it in this text box; if it is a
dynamic IP address, leave this text box blank.
If it is an Ethernet line, you have to configure the testing DNS which is working for the
Internet. If it is an ADSL or Dial-up line, the [Testing DNS] can be left blank.
As to the [Preset Bandwidth], the uplink and downlink bandwidth must be coherent to the
actual bandwidth.
Under the default configuration page, click the <Advanced> button to open the [Multiline
Advanced Settings] configuration dialog, as shown below:
Check [Enable DNS Detection] to enable it to detect the status of the multiple lines.
[DNS Detection Time]: Configures the time interval of fulfilling DNS detection. Only when the
[Enable DNS Detection] option is checked will the settings take effect.
13.3.7.
Multiline Routing Policy
SANGFOR IAM gateway device offers the powerful multiline routing policy for VPN. You can
Содержание IAM 2.1
Страница 1: ...SANGFOR IAM v2 1 User Manual IAM 2 1 User Manual September 2010...
Страница 296: ...SANGFOR IAM v2 1 User Manual 295...