Sangfor IAM 2.1, Руководство пользователя, Страница: 147 / 319

SANGFOR IAM v2.1 User Manual
146
[Enable Session Control]: Enable it to limit the maximum concurrent sessions (connections) for a
single IP address (user). This function can prevent the users from creating large number of
sessions caused by scanning tool or using several download tools (at the same time) such as P2P. It
helps to lower down the possibility that the viruses spread widely by scanning and connecting to
other devices.
[Max Concurrent Sessions Per IP]: Configures the maximum concurrent sessions for a single IP
address. If the number of concurrent connections of a single IP address reaches the threshold
configured here, the session (connection) request will be denied.
Having completed configuring this page, you have to click the <OK> button to save the settings.
7.1.2.7. Ingress System
[Ingress System] is used for banning the use of proxy software, inspecting the status of binding
IP/MAC over the layer 3 switch and monitoring encrypted IM message, etc. If the access control
policy has applied the ingress rule(s), the user‟ computer has to satisfy the corresponding rules
configured on IAM gateway device to get access to the Internet. As to the configuration of ingress
rule, please refer to Section 4.10 Ingress Rule.
[Ingress System]: Check this item to activate the ingress rule.
The configuration page is as shown below: