SANDVIK CH420:01, Руководство по установке

Страница: 10 / 110

1. Introduction
8 © Sandvik SRP AB – Doc. no. S 223.510 en Ver. 1 CH420:01
1.1 Equipment information
Purpose
The purpose of this Sandvik equipment is to be a crusher component in a
crushing and screening unit or site within an aggregate or mining process.
The machine reduces the size of rocks, minerals and similar materials. This
crusher component has been exclusively designed for this application. It is
not the responsibility of Sandvik SRP AB to secure the design and usage for
the complete aggregate, mining, or recycling process. Sandvik SRP AB will
not accept any liability for damage to equipment or injury to personnel
caused by unauthorized or improper use or modification of this equipment.
Manufacturer
This Sandvik equipment has been manufactured by:
Sandvik SRP AB
SE-233 81 Svedala
Sweden
www.sandvik.com
For maintenance
Contact the nearest Sandvik Rock Processing company, agent or
representative, or contact the factory directly:
Sandvik SRP AB
Service Department
SE-233 81 Svedala
Sweden
Telephone
+46 (0)40 40 90 00
Telefax +46 (0)40 40 92 60