S&T kontron KBox C-103-CFL Series, Руководство пользователя

Страница: 38 / 125

KBox C-103-CFL-x - User Guide, Rev. 1.0
www.kontron.com // 38
5/ System Extensions
Optionally your KBox C-103-CFL can be equipped by factory only, with following ports and additional components:
 Serial port RS232 or RS422 via an adapter module
 CAN port: via an adapter module
 DisplayPort: via corresponding adapter module
 WideLink Port: via corresponding adapter module
 Fan Tray: an additional component connected to the KBox C-103-CFL-4, KBox C-103-CFL-2 and KBox C-103-CFL-1
 Fieldbus: (Profibus, Profinet or Ethercat): via internal factory mounted adapter module
 Second 24 VDC input (X201)
 GPIO module
You have to order these components separately, in order to extend your KBox C-103-CFL at the factory.
Example of system configuration, see below:
Figure 26: KBox C-103-CFL-4 shown with optional
interfaces and with removable drive bays
1 Serial port RS232/RS42 (X205)
2 2x antenna for LTE M.2 module
3 CAN port (X204)
4 DisplayPort (X203)
or
5 Widelink port (X202)
6 Fieldbus (ProfiNet etc.),
dual RJ45 (X206)
(depending on the ordered option)
or
2x WiFi antennas for mPCIe module
7 2 nd 24 VDC input connector (X201)
or
Fieldbus (ProfiBus etc.) on D-Sub 9
(depending on the ordered option)
1
3
4
5
7
6
2