KBox B-201-CFL - User Guide, Rev 1.3
// 46
8.5.
Connecting the Wi-Fi Antenna (option)
To use the Wi-Fi feature, install the two Wi-Fi antennas included in the scope of delivery to the two Wi-Fi antenna
connectors on the rear side of the KBox B-201-CFL. Note that installing the Wi-Fi antenna increases the original keep
out area on the rear side from 10 mm to approximately 45 mm.
To install the Wi-Fi antenna, perform the following:
1.
Screw the Wi-Fi antenna on to the Wi-Fi antenna connector.
2.
Position the Wi-Fi antenna, using the Wi-Fi antenna’s hinge, in the direction required or allowed for by the
installation environment.
Installing the dual Wi-Fi antennas on the rear panel increases the keep out clearance to
45 mm and 130 mm from Wi-Fi hinge.
