S&T Kontron COMe-mEL10 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 93

S&T Kontron COMe-mEL10 Скачать руководство пользователя страница 62

COMe-mEL10 - User Guide Rev. 1.1

www.kontron.com

// 62

Sub-screen

Next Level Sub-screens / Description

PCH-FW
Configuration>
(continued)

Firmware Update
Configuration>
(continued)

OEM Key
Revocation
Configuration>

Automatic
OEM Key
Revocation>

Enable: Bios automatically sends
HECI command to revoke OEM keys.
[Enabled, Disabled]

Invoke OEM
Key
Revocation>

Enable: HECI command sent to
revoke OEM key
[Enabled, Disabled]

Sub-screen

Next Level Sub-screens / Description

Thermal
Consideration>

Enable all
Thermal
Functions>

Enable: for memory thermal management, active trip points, critical trip
points. Disable: for manual configuration
[Enabled, Disabled]

CPU Thermal
Configuration>

DTS SMM>

Disable: uses ED reported temperature values.
Enable: uses DTS SMM mechanism to obtain CPU
temperature values.
Out of Spec: uses EC reported temp values and DTS
SMM and DTS is used to handle Out of Spec
condition
[Enabled, Disabled, Critical Temp Reporting]

TCC Active
Offset>

TCC active Offset rage [0 to 63]
Temperature at which the thermal control circuit
must be activated. [0]

TCC Offset
Time Window>

For Running Average Temperature Limits (RATL)
feature, the offset time range is 5 ms to 448 s.
[Disabled, 10ms, 55ms …… 192sec, 224sec, 254sec]

TCC Offset
Clamp Enable>

For Running Average Temperature Limits (RATL)
feature, to allow CPU to throttle below P1
[Enabled, Disabled]

TCC Offset Lock
Enable>

For Running Average Temperature Limits (RATL)
feature, to lock temperature target MSR.
[Enabled, Disabled]

Bi-directional
PROCHOT#>

When processor thermal sensor trips (either core)
PROCHOT# will be driven. When bi-directional
enabled external agents drive PROCHOT# to throttle
the processor.
[Enabled, Disabled]

Disable
PROCHOT#
Output>

[Enabled, Disabled]

Disable VR
Thermal Alert>

[Enabled, Disabled]

PROCHOT
Response>

[Enabled, Disabled]

PROHOT Lock>

[Enabled, Disabled]

ACPI T-States>

[Enabled, Disabled]

Platform Thermal
Configuration>

Critical Trip
Point>

Controls temperature of ACPI Critical Trip Point, at
which OS shuts down the system. Note: 119 C is the
PLAN of Record (POR) for all Intel mobile processors.
[15 C , 23 C, 31 C………….…119 C (POR), 127 C, 130 C]

«
...
60
61
62
63
64
...
»

Содержание Kontron COMe-mEL10






























































































Отзывы:

Нет отзывов