COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2
www.kontron.com
// 13
1/
Introduction
1.1.
Product Description
The COMe Eval Carrier2 T6 is being developed as an evaluation, testing and validation carrier board (baseboard) in
ATX form factor for COM Express® Type 6 modules. It offers a testing platform for a huge variety of interfaces. Main
purpose of this carrier board is to bring out all the signals from COM Express® connector of COMe Type6 modules to
industry standard interfaces. The key features are:
1x 1000Base-T interface
4x USB 3.1 Interface, up to 8x USB 2.0
9x PCIe slot (1x x16 + 8x x1)
4x SATA standard interface,
External fan connector
Pin headers for COM Express® specific signals enabling measurement like GPIOs, I2C, SMBus and Feature
connector
External BIOS flash socket
Figure 1: COMe Eval Carrier2 T6
