OFF
ON
Connect
OFF
ON
Connect
OFF
ON
Connect
Switch the
ON/OFF
button to power on the mouse and then press
the
Connect
button to activate the connection between the mouse
and the Nano Receiver.
OFF
ON
Connect
Note :
For energy saving, switch the
ON/OFF
button to temporarily turn off the mouse and
to disconnect between the mouse and the
Nano Receiver.
OFF
ON
Connect
Thank you
for purchasing your new Sandstrøm Wireless Laser Mouse.
Before commencing the installation and set up, please check that you
have all the items and familarise yourself with this Quick Start Guide.
UNPACKING
INSTALL THE BATTERIES
Quick Start Guide
(P.N.:
2PMNBU08GAY00000-V2)
2 x Batteries (AAA size)
Mouse
GB-3
GB-2
Nano Receiver
(P.N.: MRN)
ACTIVATE THE WIRELESS MOUSE
OFF
ON
Connect
GB-4
PRODUCT OVERVIEW
GB-5
Left Button
Right Button
Nano Receiver
Battery Cover
Connect Button
ON/OFF Switch
Scroll Wheel
1. Press and lift the battery cover.
2. Insert 2 x AAA battery
3. Close the battery cover.
Please insert the batteries with the correct polarity.
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to local regulations.
The following items are included:
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
Mouse Indicator
• RED LED is on for 10 sec.
¬
Power ON
• RED LED Blinks for 10 sec.
¬
Low Battery Warning
• RED LED Blinking.
¬
Pairing (LED OFF when
paired or failed after
10 sec.)
CONNECT THE USB NANO RECEIVER
Remove the Nano Receiver from
the mouse and then plug the
Nano Receiver directly into your
computer’s USB port.
SYSTEM REQUIREMENTS
Operating Systems: Microsoft
®
Windows
®
2000/ XP/ Vista™ & Windows
®
7
Hardware: 1 available USB port
Wireless Laser Mouse
SWNLM10
Quick Start Guide
SWNLM10_IB_final101025_running change.pdf 1 10/25/10 1:48 PM
