background image

1

Unpacking

3

Charging the Battery

2

Removing the Insulating Strip from the Remote Control

5

Basic DVD Playback

4

Power Supply

1.  Slide the 

ON/OFF 

switch to the 

ON 

position.

2. Slide the front panel to open the disc 

compartment.

3. Hold the disc by its sides and carefully 

place onto the disc holder with the label 
side facing up. Gently push the disc down 
until you hear a “click” sound.

4. Slide the front panel to close the disc 

compartment. You may hold the DVD 
player in your hands or use the stand 
located at the rear of the unit. The unit 
starts playback if the disc does not have 
any menus recorded on it. If the disc has 
one or more titles recorded on it, a menu 
screen will appear on the screen.

5. To play a title, press the            / 0-9 buttons 

on the remote control to highlight the title 
and then press the      button on the unit or 
the remote control.

DVD Player

Remote Control 
(with battery)

Mains Adapter

Instruction Manual

Quick Start Guide

7” Portable DVD Player

GB

Thank you 

for purchasing your new 

Sandstr

Ø

m 7” Portable DVD Player.

Please follow this quick start guide for a 
successful first time set up.

We recommend that you spend some 
time reading the instruction manual in 
order to fully understand all the opera-
tional features it offers.

Read all the safety instructions carefully 
before use and keep the instruction 
manual for future reference.

S74PD11E

Remove the insulating mylar strip from the battery if the battery is 
being used for the first time. It is located at the bottom backside of 
the remote control.

You will find that there are many exciting features available. 
To get to know all these features, please take some time to read 
the instruction manual provided.

Tip:

(P.N.: 4034W758001)

Quick Start Guide

SOURCE

AUDIO/

ANGLE

SUBTITLE/

TITLE

MENU/

ZOOM

   /

SLOW

DISPLAY

REPEAT/

PROG

REPEAT

A-B

SETUP

GOTO

OK

SOURCE

AUDIO/

ANGLE

SUBTITLE/

TITLE

MENU/

ZOOM

   /

SLOW

DISPLAY

REPEAT/

PROG

REPEAT

A-B

SETUP

GOTO

OK

Car Power Adapter

3.5mm to 
RCA AV Cable

Earphones

Carry Bag

USB

VOL

AV OUT

PHONE

DC IN 12V

ON

OFF

Right side of the DVD player

Right side of the DVD player

Open the stand

To cigarette
lighter socket

Car Power Adapter (included)

Using the Mains Adapter

(for indoor use)

1.  Connect the mains adapter to DC IN socket on the unit then connect 

the mains adapter to the mains socket.

•  The LED indicator lights up red indicating that the battery is in 

charging mode. When the battery is charged to full capacity, the 
LED indicator goes green.

2. Remove the mains adapter. The battery is now fully charged and the 

unit is ready to use.

To the mains 
socket

Power adaptor

USB

VOL

AV OUT

PHONE

DC IN 12V

ON

OFF

Right side of the DVD player

To the mains socket

Mains Adapter (included)

Power adaptor

USB

VOL

AV OUT

PHONE

DC IN 12V

ON

OFF

Using the Car Power Adapter

(for in-car use)

Battery Operation time from fully charged battery = Approx. 3 hours

OK

OK

OK

US

B

VOL

AV OUT

PHONE

DC 

IN 12V

CHG

ON

OFF

Remove all packaging from the unit. Retain the packaging. 
If you dispose of it please do so according to any local regulations.

S74PD11E_QSG_110311.pdf   1   11/03/2011   8:00 PM

Отзывы: