S&S Northern Merlin CT1250, Руководство пользователя

Страница: 3 / 12

Merlin CT1250
User Guide
Rev: 08 07-19 3
1
General Information
The Merlin CT1250 is a ventilation interlock panel with two built in current monitors.
The Merlin CT1250 can receive connections from either remote air pressure differential switches
or the internal current monitor & remote emergency shut-off buttons. It can also be integrated
with a Building Management System (BMS) and fire alarm system.
It is recommended that the user reads this guide before using the system.
Please do NOT attempt to operate the unit until the contents of this document have been read
and are thoroughly understood.
1.1 Panel Mounting
The control panel is designed for surface mounting using 4 mounting screws.
Removing the cover on the panel gives access to the circuit board. The PCB should be removed
before drilling entry holes into the case
Important Warning Statements
Never ignore your device when in alarm.
This device requires a continual supply of electrical power – it will not work without power.
This device should not be used to substitute proper installation, use and/or maintenance of fuel burning
appliances including appropriate ventilation and exhaust systems.
Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier.
Information on waste disposal for consumers of electrical & electronic equipment. (EEE)
When this product has reached the end of its life it must be treated as Waste Electrical & Electronics Equipment
(WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used.
Please contact your supplier or local authority for details of recycling schemes in your area.