Company Name:
Sandisk Corporation
Eut:
SanDisk SSD UATA 5000 1.8”
Client Reference Number:
QRTL06-334
Work Order Number:
2006137
Compliance Report
Page 9 of 17
3 PRODUCT
LABELING
3.1 C-T
ICK
M
ARK
The compliance label indicates that the product complies with the applicable standard and
establishes a traceable link between the equipment and the manufacturer, importer or their
agent responsible for compliance and for placing it on the Australian market.
The requirements for labelling for specified electrical or electronic items are:
The mark
to be used exactly as shown in the
Radiocommunications (Compliance
Labelling - Incidentals Emissions) Notice
. No variations are permitted.
Location
the mark and supplier identification should be a permanent feature placed
on the external surface of the product as near as practical to the model
identification. Where this is not practical, due to the size or nature of the
product, the label may be placed on the labelling, packaging, warranty or
instructions of the product.
Method of
marking
the label shall be durably applied by any suitable means such as printing,
painting, moulding, etching or engraving.
Scale
the mark shall be legible and visible to the unaided eye no smaller than
3mm in diameter, with supplier identification characters no less than 1mm
in height.
Colour
the label may be reproduced in any colour provided that visibility is assured
through either contrast with the background colour or marking in relief
(moulding, engraving etc).
Note
The C-Tick mark is a protected symbol for section 188A of the
Radiocommunications Act 1992
.
