Company Name:
Sandisk Corporation
Eut:
SanDisk SSD UATA 5000 1.8”
Client Reference Number:
QRTL06-334
Work Order Number:
2006137
Compliance Report
Page 5 of 17
1 GENERAL INFORMATION/TEST FACILITY AND METHODOLOGY
The following Class B Application for ACA Compliance is prepared on behalf of
SanDisk
Corporation, Inc..
in accordance with AS/NZS CISPR22:2002. The Equipment Under Test
(EUT) was the
SanDisk SSD UATA 5000 1.8”.
The test results reported in this document
relate only to the item that was tested.
All measurements contained in this Application were conducted in accordance with AS/NZS
CISPR22:2002. The instrumentation utilized for the measurements conforms with the CISPR
22 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods.
Some accessories are used to increase sensitivity and prevent overloading of the measuring
instrument. These are explained in the appendix of this report. Calibration checks are
performed regularly on the instruments, and all accessories including the high pass filter,
preamplifier and cables.
All radiated and conducted emissions measurements were performed manually at Rhein Tech
Laboratories, Inc. The radiated emissions measurements required by the rules were performed
on the ten meter, open field, test range maintained by Rhein Tech Laboratories, Inc., 360
Herndon Parkway, Suite 1400, Herndon, Va., 20170. Complete description and site attenuation
measurement data have been placed on file with the Federal Communications Commission
(FCC) and the National Voluntary Laboratory Association Program (NVLAP). The power line
conducted emission measurements were performed in a shielded enclosure also located at the
Herndon, Virginia facility.
1.1 D
EVIATIONS
There were no deviations from the test standard(s) and/or methods.
1.2
A
CCREDITATION
S
TATEMENTS
•
NVLAP (USA): Accreditation under NVLAP Lab Code: 200061-0
•
US CAB: Recognition as of U.S. Conformity Assessment Body (CAB) for EMC testing under US-EU and US-
APEC MRA; IC accepted CAB under Phase I of APEC Telecommunication MRA. Identification number
US0079.
•
FCC (USA): Listing of test sites, Registration # 90902
•
IC (Canada): Listing of test sites, IC 2956-1 and IC 2956-2
•
US TCB (ATCB): Certification of cooperation, granted in 2005
•
CE Notified Body: Rhein Tech Laboratories, Inc. has been approved by TNO Certification B.V. to provide EMC
Test Reports and Technical Construction Files to TNO Certification B.V. Rheintech Certification number:
10118957
•
AUSTEL (Australia): Acceptance as of a Listed Test House, A97/TH/0107
•
ANATEL (Brazil, telecommunication): NCC certification for performing tests
•
Ministry of Commerce (New Zealand): Approval of a test laboratory: ECR 3-9 BAE
•
VCCI (Japan): Approval and registration of RTL test sites as R-1113 and C-1172
•
BSMI Rhein Tech Labs has been validated by the Chinese Taipei Bureau of Standards, Metrology, and
Inspection (BSMI) under the Asia Pacific Economic Cooperation Mutual Recognition Arrangement (APEC
MRA). BSMI number: SL2-IN-E-055R.
•
RTL’s testing sites are recognized by the VCCI and registered under Numbers R-1113 and C-1172
