Instructions for programming
Page 18 of 42
4.4 ~ Common setting
In this menu you can setup the parameters that are common with the Master and the Slave machine.
By pressing the button
on the menu "Common setting" prompt the display will show a screen that prompts
you to enter the password.
General Menu
Password
⤷
Common Settings
⤷
Sec.machine
To proceed, you must enter the password
4 - 2 - 3 - 1 - 4
If you insert a wrong password the display turns back to the general menu.
If the password has been entered correctly the display shows the first protected menu "
Sec. machine
".
4.4.1 ~ Secondary machine
General Menu
» Menu not used on the model SSP.
Set up “None”
⤷
Common Settings
⤷
Sec.machine
4.4.2 ~ Payment setting
This menu allows you to set all parameters of the payment systems.
General Menu
⤷
Common Settings
⤷
Payment setting
Name Submenu
Description
Default
Protocol type
» This submenu allows to set the protocol type:
- MDB
- Executive
- Executive price holding
- Executive price holding special
Max overpay value
» This menu allows to set the maximum overpay value.
0
Force vend
» This parameter is used to prevent the use of the vending machine as a
change machine.
» When this parameter is enabled, you can get the change only in the
following cases:
If the Multi vend is disabled:
When you make a sale with coins, if the sale is successful the proper
change is returned, otherwise if the sale fails the coin changer gives
you back all the money.
If the Multi vend is enabled:
When you make a sale with coins, if the sale is successful the change
is retained for a subsequent selection. If you want the change
returned, you must press the coin return button. If the sale is not
successful, all the credit is retained.
No
4
