background image

S&C Instruction Sheet 695-505  

3

Retain this  

Instruction Sheet

This instruction sheet is a permanent part of your S&C Vista SD Underground Distribution 
Switchgear. Designate a location where you can easily retrieve and refer to this publication. 

Proper Application

 WARNING

The equipment in this publication must be selected for a specific application. The  
application must be within the ratings furnished for the selected equipment.

Warranty

The warranty and/or obligations described in S&C’s Price Sheet 150, “Standard Conditions 
of Sale – Immediate Purchasers in the United States” (or Price Sheet 153, “Standard 
Conditions of Sale – Immediate Purchasers Outside the United States”) plus any special 
warranty provisions, as set forth in the applicable product-line specification bulletin, 
are exclusive. The remedies provided in the former for breach of these warranties shall 
constitute the immediate purchaser’s or end user’s exclusive remedy and a fulfillment of 
the seller’s entire liability. In no event shall the seller’s liability to the immediate purchaser 
or end user exceed the price of the specific product that gives rise to the immediate 
purchaser’s or end user’s claim. All other warranties, whether express or implied or 
arising by operation of law, course of dealing, usage of trade or otherwise, are excluded. 
The only warranties are those stated in Price Sheet 150 (or Price Sheet 153), and THERE 
ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. ANY EXPRESS WARRANTY OR OTHER OBLIGATION 
PROVIDED IN PRICE SHEET 150 (OR PRICE SHEET 153) IS GRANTED ONLY TO THE 
IMMEDIATE PURCHASER AND END USER, AS DEFINED THEREIN. OTHER THAN AN 
END USER, NO REMOTE PURCHASER MAY RELY ON ANY AFFIRMATION OF FACT OR 
PROMISE THAT RELATES TO THE GOODS DESCRIBED HEREIN, ANY DESCRIPTION 
THAT RELATES TO THE GOODS, OR ANY REMEDIAL PROMISE INCLUDED IN PRICE 
SHEET 150 (or PRICE SHEET 153.)

Warranty 

Qualifications

The seller’s standard warranty does not apply to components not of S&C manufacture 
that are supplied and installed by the purchaser or to the ability of the seller’s equipment 
to work with such components.

Introduction

Содержание Vista SD




























Отзывы: