S&C BankGuard PLUS, Инструкции по устранению неисправностей

Страница: 2 / 16

1011-550 2
Qualified Persons
Read this
Instruction Sheet
Thoroughly and carefully read this instruction sheet before programming, operating, or
maintaining your IntelliTEAM II Interface Module. Familiarize yourself with “SAFETY
INFORMATION” on pages 3 and 4.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your IntelliTEAM II Interface Module.
Designate a location where you can easily retrieve and refer to this publication.
Warranty
The standard warranty contained in S&C’s standard conditions of sale, as set forth in
Price Sheet 150, is applicable to the IntelliTEAM II Interface Module.
Latest Document
Release
The latest release of this instruction sheet is available online at www.sandc.com.
Select: Support/ Product Support Documents. Documents are posted in PDF format.
!
WARNING
The equipment covered by this publication must be installed, operated, and main-
tained by qualified persons who are knowledgeable in the installation, operation, and
maintenance of overhead electric power distribution equipment along with the asso-
ciated hazards. A qualified person is one who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from non-live
parts of electrical equipment.
• The skills and techniques necessary to determine the proper approach distances cor-
responding to the voltages to which the qualified person will be exposed.
• The proper use of the special precautionary techniques, personal protective equip-
ment, insulating and shielding materials, and insulated tools for working on or near
exposed energized parts of electrical equipment.
These instructions are intended only for such qualified persons. They are not intended
to be a substitute for adequate training and experience in safety procedures for this type
of equipment.
INTRODUCTION