S&B Filters 75-5100, Руководство по установке

Страница: 8 / 16

Install the 6.4” Smog Pump Bracket (S) at the second
mounting hole with the bolt removed in Step 8.
Tool Required:
12mm Socket/Wrench
14
13
11
Apply even pressure and carefully slide the grommets out of the bracket. Be careful not to damage the grommets because they
will be reused and installed onto the three Smog Pump Brackets (S, T, and U) .
Connect the Smog Pump Harness Extension (Y) into the stock harness. Route the harness behind the washer fluid reservoir and
place the harness by the smog pump brackets.
Apply even pressure and carefully pull the grommets
out of the smog pump arms. Be careful not to damage
the grommets. Perform the same steps for the other two
grommets then remove the smog pump from the bracket.
12
7
INSTALLATION STEPS: